42cm PU Beach Wheel

Description

Low Pressure Polyurethane Beach Wheels for more heavy duty, ambitious use

WheelEEZ® wheels are equipped with unique, pliable, pneumatic tires that will roll, even glide, over soft sand, turf and other challenging terrain. The tire’s low pressure permits rolling heavy loads over unstable/uneven ground with ease. These balloon wheels will not sink or plow into soft ground. They are great for use on delicate surfaces preventing indentations, as well as providing shock-absorbing qualities.

• Maximum weight limit of 80 kg per wheel.
• Will get you over terrains that are not accessible to other wheels.
• Stainless steel ball bearings in a plastic housing with fiberglass and inhibitors to keep the bearings impervious to outside elements.
• Bearing cassettes are felt sealed to keep sand and grit out.
• Comes stock with 25.4 mm axle bore and replaceable ball bearing cassettes.
• 20mm Bearing Casings can be interchanged with these wheels also… available at our Accessories page.
• Converter Bush (25mm to 50mm) available.

Dimensions:  42 x 20 cm

N.B For correct functioning the Balloon Wheels needs to be inflated to a very low 2-4 PSI. To ensure the correct pressure a low pressure tyre guage is required, also available from Beachwheels NZ here: 

This product is not designed and should not be
(i) used for horizontal movement along an incline where one side of the product is elevated above the other
(ii) moved at speeds in excess of normal walking speed (2-4 miles per hour)
(iii) subjected to sharp turning maneuvers.
Exceeding tyre pressure and/or maximum payload limitations voids any Warranty.  This product is not intended to be used for long-term storage under loaded conditions. This product is not legal for “ON-ROAD” use and is not intended to be used as a flotation device, flying instrument or toy.